Tag: NBPM - Page 4 - Shy Gal's Building Blog

Review of nanoblock Celebi NBPM_054

November 29, 2022March 3, 2023shygal

This post is a review of the nanoblock Celebi build. Celebi is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Number: NBPM_054

Number of Pieces: 130

Difficulty Rating: 2/5

Celebi is the mythical Pokemon that was released in generation 2. It was the second mythical Pokemon, with the first being Mew. Celebi is known to have the power to control time. This set is one of 3 that were/are only available at Pokemon Centers in Singapore; the other 2 are the Crystal Gyarados and the Crystal Lapras.

Celebi, unlike most builds, begins with the middle of the head. There is a base layer in the head, and from there, you build up until you have completed the top of the head. Then you turn it over and finish the bottom of the head, be careful not to knock the antenna off. Next, you build the little body by creating layers of nanoblocks. I like the detail of the clear blocks to making little wings. Once you connect the head to the body, it’s time to add on the little feet and attach the base.

As a heads up, Celebi is a slightly top-heavy build that is likely to fall if you bump the table it’s sitting on. Overall I’m glad I went through the extra work required to get this set because it comes out so cute. It also uses colors you don’t see very often in Pokemon builds.

Things I liked:

The detail of the wings

Things I didn’t like:

Easy to knock over on accident

Review of nanoblock Cyndaquil NBPM_029

November 22, 2022March 3, 2023shygal

This post is a review of the nanoblock Cyndaquil build. Cyndaquil is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Names:

English: Cyndaquil
Japanese: Hinoarashi

Number: NBPM_029

Number of Pieces: 150

Difficulty Rating: 2/5

Cyndaquil is the fire-type starter from generation 2. It is a starter along with Totodile and Chikorita. It is also one of the starters in the new Pokemon Legends: Arceus game. Cyndaquil is generally shown as a very shy Pokemon.

The build begins with a base of bricks. In the second layer, you start to add the dark on the back. You continue to build layers of bricks, and eventually, you begin the flame on the back. The next step is to start building the head. You build the head up from a base in layers circling and creating rings for the head.

Once you have the started head, attach it to the body you built earlier. Next, you close up the head and make the flame on the back. Once you have completed closing up the head, you add more details to the flame. The final step is to add the details of the feet and the clear bricks that keep the build from tipping.

Overall I think this is a super cute build. Cyndaquil has always been one of my favorites, so I was worried about how the figure would turn out. I like the amount of detail in the flame between the orange and clear red bricks. I wish they had used a lighter color for the light part of his body. It seems really dark compared to the photo.

Things I liked:

The amount of detail in the flame

Things I didn’t like:

The light section of the body is too dark

Review of nanoblock Totodile NBPM_031

November 15, 2022March 3, 2023shygal

This post is a review of the nanoblock Totodile build. Totodile is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Names:

English: Totodile
Japanese: Waninoko

Number: NBPM_031

Number of Pieces: 150

Difficulty Rating: 2/5

Totodile is the water starter from generation 2. It is light blue with orange spikes going down his back.

Overall the build is an average build from a solid base. There are a lot of areas with different colors, such as dark red for the eyes and dark grey to make his nostrils. The most challenging part I had was getting the fangs to correctly line up because it is just a 1×1 brick hanging off a 2×3 brick.

Totodile is very recognizable as the little water dragon he is. He does have an excellent line of red going down his back which helps to make it clear which Pokemon you are looking at. I notice his eyes seem to be huge compared to the rest of the Pokemon.

Things I liked:

How the spikes ended up looking

Things I didn’t like:

Eyes seem super large compared to the rest of the nanoblock pokemon

Link to order: Amazon

Review of nanoblock Chikorita NBPM_030

November 8, 2022March 3, 2023shygal

This post is a review of the nanoblock Chikorita build. Chikorita is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Names:

English: Chikorita
Japanese: Chicorita

Number: NBPM_030

Number of Pieces: 90

Difficulty Rating: 1/5

Chikorita is one of the starter Pokemon for generation 2, and like most grass-type starters, it’s green. Chikorita has 2 notable features that I hoped would be incorporated into the build. First, there is a large leaf hanging off Chikorita’s head. It also has a collar of spikes going around its neck.

Overall the build was fairly simple, which is what I would expect from a level 1 build. I was happy to see that both the collar and the leaf were completely intact. The collar is created by studs sticking out of the main body. Once the main body is built, you build a leaf and attach it to the head.

Things I liked:

How the leaf looks floating of its head

Things I didn’t like:

One Thing

Link to order: Amazon

Review of nanoblock Pichu NBPM_028

November 1, 2022March 3, 2023shygal

This post is a review of the nanoblock Pichu build. Pichu is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Number: NBPM_028

Number of Pieces: 90

Difficulty Rating: 1/5

Pichu was the first Pokemon build that had a difficulty level of 1 I built. It is a simple build made up of 2 parts, the head, and body.

The body is a simple few layers of mostly yellow with a little bit of black to make the stripes.

The head is generally a cube that creates a face with black-tipped ears. Overall it was a simple build that took very little time to build.

Things I liked:

Cute simple build

Link to order: Amazon

Review of nanoblock Dragonite NBPM_011

October 18, 2022March 3, 2023shygal

This post is a review of the nanoblock Dragonite build. Dragonite is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Names:

English: Dragonite
Japanese: Kairyu

Number: NBPM_011

Number of Pieces: 190

Difficulty Rating: 3/5

Dragonite is the original endgame dragon from generation 1. He is a lot rounder and more cartoon-looking than the dragons later in the series. In the Pokemon games and TV show, Dragonite can both transport mail and people.

This build starts with the head. You start with a base and build the dragon up. The head has the tricky part of getting the antenna lined up correctly and keeping them in place for the rest of the build.

Next, you build the body in a matter similar to the head.

Once you have a body and head, you attach them to each other. The next step is to build the wings. These are the most challenging part because of the amount of detail to create the illusion that the tan is all on one side and the teal is on the other.

I think the Dragonite build does an excellent job of capturing the fat round dragon, which is how it appears in the games.

Things I liked:

I think the build captures the round dragon well

Things I didn’t like:

The wings took me a couple tries to get right

Review of nanoblock Psyduck NBPM_024

October 11, 2022March 3, 2023shygal

This post is a review of the nanoblock Psyduck build. Psyduck is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Number: NBPM_024

Number of Pieces: 130

Difficulty Rating: 2/5

Psyduck is a generation 1 pokemon that is known for having constant headaches. The headaches give Psyduck access to psychic abilities. Misty had a Psyduck that would always pop out of the Pokeball in the Anime.

Overall the build for Psyduck is building up from the bottom layer. Each layer builds on itself until you get up to the head. You separately make the duck beak and attach it to the head. After connecting the beak, you continue to add layers until you have a sealed-up duck. Then all that is left is to add the little black feathers at the top of its head.

I like the Psyduck build because it is recognizable. However, in my mind, Psyduck is more of a bright crayon yellow, and the color of the bricks used in the build are more of goldenrod. I do think the little feathers on the head are cute.

Things I liked:

The black bricks used to add the feather detail to the head

Things I didn’t like:

I wish he was more yellow

Review of nanoblock Pokemon Quest Eevee NBPM_041

October 4, 2022March 3, 2023shygal

This post is a review of the nanoblock Pokemon Quest Eevee build. Pokemon Quest Eevee is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Names:

English: Eevee
Japanese: Eievui

Number: NBPM_041

Number of Pieces: 120

Difficulty Rating: 2/5

Inside the primary collection of Pokemon, there have been a couple of subcollections, one being the collection for Pokemon Quest (numbers 36-42). Under the Pokemon Question collection, most Pokemon are simply squares stacked on each other to create a body and head. Each of these also depends on stickers to make a face. Read here for my opinion of nanoblock stickers. So while I own everything in the Pokemon Quest collection, I have only built and will likely only build Eevee. I made Eevee before I knew about the stickers.

The build was really straightforward at the beginning. Starting with a base and building up. This may have been the first time I had seen the ball joint, but it was definitely the first time I had needed to build around the ball. Building Eevee is just building layers to create the Pokemon until you get to the ears.

The ears are my favorite detail but building them took more time and attention since they are slanted. After making the ears, you need to add stickers. My stickers were off-center, so it was a pain to line up; sadly, one of my stickers even ripped even though we were being super careful and using tweezers. The rip isn’t noticeable when you look at the build now that the ears are attached.

You add on Eevee’s tiny feet after building and attaching the ears. The final building step is to connect the tail. Now you have completed the Eevee body! The last step is to add the sticker for its face. Again you need to be careful, so the sticker doesn’t rip and is placed right because you only get one shot.

I think this Eevee is just as cute if not cuter than the original one (NBPM_005). I really like the details of having a moveable tail. However, I had real problems getting the stickers to stick in the right place. Also, even though it has been sitting in a display cabinet for a couple years, the stickers no longer adhere entirely to the build.

Things I liked:

The slightly posable tail

Things I didn’t like:

The stickers

Review of nanoblock Crystal Lapras NBPM_056

September 27, 2022March 3, 2023shygal

This post is a review of the nanoblock Crystal Lapras build. Crystal Lapras is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Names:

English: Lapras
Japanese: Laplace

Number: NBPM_056

Number of Pieces: 130

Difficulty Rating: 2/5

Crystal Lapras is a version of Lapras that uses clear blue bricks instead of solid blue. Since the build is identical to that of the original Lapras, I’m going to direct you there for a review of the building process. I’m only going to review the final build of the Crystal Lapras here.

This kit is only available at Pokemon Centers in Singapore. I got mine from an eBay order.

Overall I don’t notice a lot of difference between the new model and the original. The blue is a little darker, taking it further away from the Pokemon’s actual coloring. I also tend to have a more challenging time working with the clear blocks because they never seem to fit as tightly as regular bricks. I don’t feel that the clear bricks add much, even when it is sitting in the direct light of my lightbox.

Things I liked:

This was a nice simple build after building the first one.

Things I didn’t like:

I don’t feel that the clear adds much

Review of nanoblock Crystal Gyarados NBPM_055

September 20, 2022March 3, 2023shygal

This post is a review of the nanoblock Crystal Gyarados build. Crystal Gyarados is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Number: NBPM_055

Number of Pieces: 170

Difficulty Rating: 3/5

Crystal Gyarados is a version that uses clear blue bricks instead of solid blue. Since the build is identical to that of the original, I’m going to direct you there for a review of the building process. I’m only going to review the final build of the Crystal Gyarados here.

This build is only available at Pokemon Centers in Singapore. I got mine from an eBay order.

Overall I like this build better than the original build. You can see the eyes better from any angle versus just the select angles in the original build. I don’t like how the light grey looks with the crystal blue. I wish they had chosen a different clear or maybe a different color. I think the light grey stands out, and the number of solid bricks is a little awkward.

Things I liked:

How you can see some of the details more easily

Things I didn’t like:

How the clear looks with the number of solid bricks