Tag: NBH - Page 4 - Shy Gal's Building Blog

Review of nanoblock Great Wall of China NBH_136

June 29, 2023March 12, 2024shygal

This post is a review of the nanoblock Great Wall of China build. The Great Wall of China is part of the nanoblock Sights to See Collection. Wondering what else is part of the Sights to See Collection? Click here for a list.

Number: NBH_136

Country: China

Number of Pieces: 640

Difficulty Rating: 2/5

This build is different than most of the buildings in the Sights to See Collection; instead of having 1 large plate, there are 5 smaller plates that are staggered to create the base.

The build begins with setting the plates up and laying out the base of the hills in green. The darker green is actually a much bluer green which looked a little funny building but looks ok in the finished build. Then the 3rd green and tree stumps are added in the second step to create a complete base where all the base plates are connected.

Over the next several steps, the walls are built up using yellow or tan bricks. I’ve been to the Great Wall, and as far as I remember, the grey went all the way down the wall, not just on top of the wall, so I find the color change confusing.

The build is straightforward as long as you are careful to make sure to count between 1, 2, 3, and 4 on each layer added. Sometimes the 1s can be a bit tough to see.

There are 2 towers in the build. They are both made of shades of grey. I feel like the towers are reasonably close to how the towers actually look in real life.

The build also comes with a couple nanoids. I didn’t include them in my build because I don’t feel like they match the scale.

Things I liked:

I like the collection of greens to create the illusion of hills at the base of the walls

Things I didn’t like:

I don’t like the yellow/tan bricks as a base for the wall

Review of nanoblock Himeji Castle NBH_197

June 22, 2023May 17, 2023shygal

This post is a review of the nanoblock Himeji Castle build. The Himeji Castle is part of the nanoblock Sights to See series. Wondering what else is part of the Sights to See series? Click here for a list.

Number: NBH_197

Number of Pieces: 490

Difficulty Rating: 3/5

Himeji Castle is one of the significant landmarks in Japan. It’s a white castle with a grey roof. While there is a deluxe edition, I also wanted to try the smaller model because there is a collection of miniature castles built on the same size base.

As to the build, there is a collection of white and light grey bricks to create the building. In terms of the directions, it is easy to tell what shape brick goes where. However, I personally had some difficulty telling where the white bricks were in the previous layer and which were light grey in the current layer. I also had challenges with the outer wall. I think I had to rebuild it like 3 times until it was there and ready to keep going.

To me, it was a really lovely building of a castle. I’m not how much it looks like Himeiji, but it is still clearly a Japanese castle.

Review of nanoblock Kirby Dream Land NBH_230

April 20, 2023March 3, 2023shygal

This post is a review of the nanoblock Kirby Dream Land build. Kirby Dream Land is part of the nanoblock Sights to See collection. Wondering what else is part of the Sights to See collection? Click here for a list.

Number: NBH_230

Number of Pieces: 400

Difficulty Rating: 3/5

Please note that while several characters are on the box, the only characters that are actually part of the build are Kirby and Whispy Woods (the tree). The other characters shown are part of volume 2 of the Kirby mininano collection.

This build has 4 sections. There is Whispy Woods, the base, Kirby on a star, and a tree.

I think it is worth noting there are 2 shades of green (one used for each tree), but they are very similar in poor lighting, so be careful.

Whispy Woods is basically a semicircle of nanoblock. Until you add leaves, the build goes up in layers, with each layer covering the brick gaps from the previous layer. I was a little surprised that the mouth didn’t have anything behind it, but it is really just an opening that you can see through.

When adding the leaves to Whispy Woods, you need to be careful because there are several places where bricks are overhanging. This is tricky because if you push too hard, the bricks might collapse. After building the overhanging sections, the rest of the leaves are straightforward layers.

The final step for Whispy Woods is to add the details. This includes apples in the leaves. There are also the nose and arms added. The final step is to add the root details.

The second section in the instructions is the base. There is a misprint in the instructions. In step 27, the brick between the 2 10×10 plates is green. In step 28, the same brick is shown as clear. Based on extra brick counts and how it appears in steps 30 and 42, I determined the brick should be green. Other than the color typo setting up the base for Whispy Woods is very straightforward.

The third step in the instructions is the small tree in the background. The tree is very straightforward.

Next, you attach the smaller tree and Whispy Woods to the base. The studs for Whispy Woods are nicely lined up, so it was easy to attach him, which was nice and unexpected. I expected to need to turn the roots to attach Whispy Woods.

The final step is to build Kirby on the star. I built Kirby on my nanoblock pad. At some point, I picked up the build, which was very flexible, so I made sure to do the building on the pad.

First, you build Kirby. It begins with building the base couple of layers that create the entirety of Kirby’s base. The build then goes up in layers using slanted pieces to the arms and to create Kirby’s round shape.

The second step to building Kirby is to build the star he sits on. The star is 2 layers tall and very straightforward to put together.

The final step is to connect Kirby to the star. Then attaching Kirby to the base.

Things I liked:

That the build is the same scale as the mininano collection and it even comes with parts to attach those characters to the base

Things I didn’t like:

Kirby was really flexible while building him, so I was super glad that I had my pad

Review of nanoblock London Tour Bus NBH_080

June 23, 2022March 3, 2023shygal

This post is a review of the nanoblock London Tour Bus build. The London Tour Bus is part of the nanoblock Sights to See series. Wondering what else is part of the Sights to See series? Click here for a list.

Number: NBH_080

Country: UK

Difficulty Rating: 2/5

It used to be that you couldn’t travel anywhere in London without seeing the classic double-decker bus. Over the years, they have slowly been replaced by greener single-deck buses. However, you can still find the double-decker tour buses all over. The bus rides are amazing on days with good weather with the open-top deck. While this kit says London, I have seen tour busses like this worldwide.

The first 6 steps are creating the central base of the bus. You then build the layers to build the sides of the bus. Each layer adds either red or details to the build. Eventually, you create the floor of the top layer. Then you add the seat bottom and seat backs. Then you add the walls to finish off the top of the build. Then you flip over the build to add the wheels. After building the London taxi, I was disappointed that the wheels didn’t move. The final steps of the bus part of the build are to add the poll at the back of the bus and the front of the bus. If you want to, there are people that you can add to the top of the bus. The last step in the directions is to add the stickers to the side of the bus. I did not add the people due to scale and didn’t add the stickers for the reasons in my post here.

Overall, I enjoyed the build. I liked the detail nanoblock adds with bricks getting from the bottom to the top with different colors. I don’t feel that the stickers would have added a lot to the build, so I didn’t add it.

Things I liked:

The amount of detail in bricks

Things I didn’t like:

That the wheels don’t spin