Author: shygal - Page 14 - Shy Gal's Building Blog

Review of nanoblock Muichiro Tokito NBCC_111

January 19, 2023March 3, 2023shygal

This post is a review of the nanoblock Muichiro Tokito build. Muichiro Tokito is part of the nanoblock Character collection. Wondering what else is part of the Character Collection? Click here for a list.

Number: NBCC_111

Number of Pieces: 170

Difficulty Rating: 2/5

Muichiro Tokito is a member of the Demon Slayer Corps in the Demon Slayer Anime. For more information about him, check out the fandom wiki page. For more information about the nanoblock builds, check out my collections page for links to other reviews.

Normally when there are both navy and black bricks, it can be hard to tell which color which. There is enough navy in this build in this kit, so it is clear which color is which.

This nanoblock build is split into 2 parts. There is the head and the body.

The build begins with a layer of skin-tone brick on the base. I build the head on my nanoblock pad. The main sections goes up in straightforward layers. There are some bricks just hanging out off the head, which looks a bit odd until the build is completed.

The next step is to build the hair at the front of the head. It can be a bit tricky to get the center section completely centered. Then you add the front hair fringe.

The last section of the head is the hair in the back. I started by doing the reversed steps, so I needed to rebuild the section. Once I was paying full attention, it was very straightforward.

After finishing the head, it’s time to move on to the body.

The body begins with a layer of navy and white. in goes up in layers adding details to the outfit. Once you add his left arm onto the build, you can no longer use the nanoblock pad because of the studs coming out the side.

At one point, you flip the build over. I have problems reading instructions when the build is upside down. I had problems getting the legs lined up because I mirrored things around several times. After adding the legs, you add the feet and the stabilizer brick.

Then you attach the sword to Muichiro Tokito’s left side. These connect to the front and back of the build.

The final step is to connect the head to the body.

Things I liked:

I really like the multi-colored hair and how the hair is built

Things I didn’t like:

I wish the hilt of the sword was a short black or that the back was 2 blacks long so that the hilt and sword were different lengths

Review of nanoblock Mega Charizard X NBPM_057

January 17, 2023March 3, 2023shygal

This post is a review of the nanoblock Mega Charizard X build. Mega Charizard X is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Names:

English: Mega Charizard X
Japanese: Mega Lizardon X

Number: NBPM_057

Number of Pieces: 320

Difficulty Rating: 3/5

Mega Charizard X was originally in Pokemon X. Mega is used to describe Pokemon that have mega evolved, which was introduced in generation 6. Pokemon X has its own mega evolution named Mega Charizard X. Mega Charizard is grey with blue flames instead of the standard orange.

This built is breaks the building focus into several parts. There is the body, wings, tail flame, and head. Overall the directions are clear as to which colors to use and when.

You begin by building the body. You start with a base layer and build up. The arms on my build are a bit loose and feel like they want to fall off the studs holding them in place. The build is straightforward other than the last step when you flip the build upside down. It is hard to tell where exactly where the underside bricks go.

The next step is to build the pair of wings. I have trouble getting wings to line up because they are so narrow. The directions are clear as to when and where to use each brick. They nicely and solidly attached to the body and didn’t cause the body to tip, which was nice.

Then you build the tail flame using clear blue and pastel blue bricks. It was tricky to attach to the body because it’s a 2×2 brick going onto a single stud.

The final part of the build is the head. You begin with a base layer and build up in layers. As you build up the main section of the head, you will also add the flames coming out of the Charizard’s mouth. The flames are one of several brick chains on the head that you will build in the process of creating the head.

Things I liked:

The use of multiple shades of blue

Things I didn’t like:

I’m not sure I needed another Charizard build I would rather have had a different Pokemon

Review of nanoblock Tengen Uzui NBCC_110

January 12, 2023March 3, 2023shygal

This post is a review of the nanoblock Tengen Uzui build. Tengen Uzui is part of the nanoblock Character collection. Wondering what else is part of the Character Collection? Click here for a list.

Number: NBCC_110

Number of Pieces: 180

Difficulty Rating: 2/5

Tengen Uzui used to be a member of the Demon Slayer Corps in the Demon Slayer Anime. For more information about him, check out the fandom wiki page. For more information about the nanoblock builds, check out my collections page for links to other reviews.

This nanoblock build is split into 2 parts. There is the head and the body.

The build begins with a layer of skin-tone brick on the base. I build the head on my nanoblock pad. The head goes up in layers. each layer is different between the eyes, hair, and face markings. I was very confused by the face marking while I was building them because they don’t really look like the character in the photo on the box.

Once the main head section is built, it’s time to add the details. Tengen Uzui has his hair up in the back, so you add the hair in the back. You also add blue trails that are coming off his headband. The last detail in the head is to add the headband.

After finishing the head, it’s time to move on to the body.

The body begins with a white brick that goes up in layers. After a few layers, the main torso is completed.

The next step is to build and add the arms. The arms are very straightforward. Then you attach the head. At this point, the build won’t be able to stand on its own until you add the clear base at the end.

Then, you build and create the legs. I missed that the large round brick was centered on the smaller round brick, so I needed to fix that later. After adding the hips, the legs were easy to attach.

The next step is to build and attach Tengen Uzui’s sword. The swords are very straightforward to build and are easy to attach to the build.

The final step is to build the base of clear bricks. This allows the build to stand on its own.

Things I liked:

The double sword on his back is unique compared to the original build

Things I didn’t like:

The mark around his eye doesn’t really look like the mark from the anime

Review of nanoblock Mega Charizard Y NBPM_058

January 10, 2023March 3, 2023shygal

This post is a review of the nanoblock Mega Charizard Y build. Mega Charizard Y is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Names:

English: Mega Charizard Y
Japanese: Mega Lizardon Y

Number: NBPM_058

Number of Pieces: 310

Difficulty Rating: 3/5

Mega Charizard Y was originally in Pokemon Y. Mega is used to describe Pokemon that have mega evolved, which was introduced in generation 6. Pokemon X has its own mega evolution named Mega Charizard X. Mega Charizard Y looks like a more powerful version of a regular Charizard.

Overall the build for Charizard Y is quite similar to regular Charizard. You first build your body which is the normal start with a base layer and build up. Next, you make the wings which are the most detailed part of the build. This is because of the layering of blue and orange so that you don’t see how the blue and orange are held together. Finally, you build a tail flame and a head with straightforward directions.

Things I liked:

The use of clear blocks for the tail

Things I didn’t like:

I’m not sure I needed another Charizard build

Review of nanoblock Time Machine NBCC_076

January 5, 2023March 3, 2023shygal

This post is a review of the nanoblock Time Machine build. The Time Machine is part of the nanoblock Character Collection. Wondering what else is part of the Character Collection series? Click Here for a list.

Number: NBCC_076

Number of Pieces: 240

Difficulty Rating: 2/5

Doraemon is known for having all kinds of tools. One of these is a Time Machine. You can use the Doraemon model NBCC_074 to have Doraemon sitting and controlling the machine.

The build begins by starting with a base and extending on the base. From there, you add additional detailed outlines on the base. You continue to build the details of the time machine. You build up the chair and the console as you build on each layer. I really like that the chair is set up so it’s compatible with the Doraemon build. I really like the details of the console and the use of clear bricks in the details.

Once you have created most of the machine, you flip it over and add the supports to tie the base bricks together. I think this step should have been earlier because I had problems with the base staying connected when I was building. The last thing you add is the lamp. Stacking 24 1×1 round pieces on top of each over is difficult to get straight. The final detail is the lamp. It was tricky to get the lamp on and getting the lamp set straight.

In general, I wasn’t super excited when I completed this build. The Time Machine by itself is a little boring because it is just a seat and a lamp. I did get excited; however, when I added the Sitting Doraemon (NBCC_074), I did in another build because it made it look a lot less empty.

Things I liked:

The playability of the set

Things I didn’t like:

The light is hard to get perfectly straight
The build is a little boring by itself

Review of nanoblock Suicune NBPM_091

January 3, 2023March 3, 2023shygal

This post is a review of the nanoblock Suicune build. Suicune is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Number: NBPM_091

Number of Pieces: 220

Difficulty Rating: 3/5

Suicune is one of the elemental legendary Pokemon along with Raikou and Entei from generation 2. It is the water elemental Pokemon.

The nanoblock builds for the generation 2 legendaries are all very detailed, so I’m excited to build them all. Suicune has what appears to be delicate ribbons surrounding it. I was sure the ribbons would look good because of how Slyveon’s ribbons looked.

This build begins by laying out the entire body in layers. I love the teal bricks that they used for the main body of Suicune.

The build was mostly straightforward. The head details are simply attached to the front of the body. I really like how Suicune’s face turned out.

Then you add the legs, which is very straightforward.

The final details are creating the ribbons over the head and down the sides. Since it is just chains of bricks, it was a bit tricky to get things to line up perfectly. There are optional clear bricks to support the ribbons. Since I don’t move my finished builds, I didn’t feel like it was necessary to add them.

Things I liked:

The ribbons and how they look flowy

Things I didn’t like:

How the build would have looked if I had added the extra support bricks

Review of nanoblock Sitting Doraemon NBCC_074

December 29, 2022March 3, 2023shygal

This post is a review of the nanoblock Doraemon build. The Doraemon is part of the nanoblock Character Collection. Wondering what else is part of the Character Collection series? Click Here for a list.

Number: NBCC_074

Number of Pieces: 330

Difficulty Rating: 3/5

Doraemon is a little robot from an anime for little kids. He has sorts of tools that he uses to help a little boy. He holds a special place in my heart since it was the only TV show I could understand while I was studying in Japan. I bought this kit to have him sit inside the Time Machine build.

You begin the build by creating the body. You start with a blue base that makes up the body’s core. You then add the white and adding the details of the feet. Next, you add the little red brick that makes up the tail. You then build up the feet and body by adding layers. Eventually, you get to add on arms and Doraemon’s little bell. The last stage of the body is adding the red that both holds the head and forms the collar.

The next part of the build is creating the head. I was thrilled that I had my nanoblock pad for this build. This is because you regularly add to the base with pieces connecting on the second layer over the first few steps. Once you have completed the first and second layers, you build up the head like usual. It is a general sphere build where you build the outside with a hollow inside. As you make the head, you add the details of the eyes, nose, and eyes. The final step of Doraemon is adding his whiskers. These are tricky because you are setting them at an angle instead of stacking bricks. I found it easier to put the main brick on the model first and then adding the slanted bricks.

Overall I really liked the Doraemon build. I think he is highly recognizable with great coloring. I like that there are details like the curved feet and the bell.

Things I liked:

The amount of detail in the character
I really like that Sitting Doraemon fits in the Time Machine build (Shown above)

Things I didn’t like:

The base of the head would have been hard without a nanoblock pad

nanoblock I’m Doraemon Collection

December 28, 2022March 3, 2023shygal

Doraemon is a long-running Anime in Japan. There are several TV shows, manga, and movies. It’s been running for over 50 years.

Doraemon is a robot cat sent back in time to help Nobita become a better person. The show features Doraemon, Nobita, and the kids that Nobita interacts with. Doraemon also has a lot of gadgets to try and get Nobita to improve as a person.

Most of the builds featuring Doraemon and character are part of the NBCC line, but there are some in other lines.

Set Number	Set Character
NBCC_036	Doraemon
NBCC_037	Nobita
NBCC_038	Dokodemo Door & Small Light & Take Copter
NBCC_039	Gian
NBCC_040	Suneo
NBCC_041	Shizuka
NBCC_042	Dorami
NBCC_074	Sitting Doraemon
NBCC_075	Nobita (Lying Down)
NBCC_076	Time Machine

Review of nanoblock Raikou NBPM_089

December 27, 2022March 3, 2023shygal

This post is a review of the nanoblock Raikou build. Raikou is part of the nanoblock Pokemon collection. Wondering what else is part of the Pokemon Collection? Click Here for a list.

Number: NBPM_089

Number of Pieces: 250

Difficulty Rating: 3/5

Raikou is one of the elemental legendary Pokemon along with Entei and Suicune from generation 2. It is the thunder elemental Pokemon.

The nanoblock builds for the generation 2 legendaries are all very detailed, so I’m excited to build them all. Raikou looked to me to have the most detail of the 3 builds.

The build begins with base layers to create the basics of the body. After building the first few layers of the body, you build the basics of the head and attach it to the body.

After attaching the base layers of the head, the rest of the main body and head are built up in layers. When you add the ears, it’s hard to tell where exactly the bricks you are adding are in the directions.

Then it’s time to add details like fangs, legs, and tail. Each detail is fairly straightforward. The tail was a bit tricky because of the chaining, so it was hard to not press too hard, causing the bricks to pop off.

Things I liked:

I really like the amount of detail in Raikou
I think that the colors are super accurate for the Pokemon

Things I didn’t like:

There is some chaining which makes it hard to keep things exactly where I want the bricks

Review of nanoblock Kyojuro Rengoku NBCC_094

December 22, 2022March 3, 2023shygal

This post is a review of the nanoblock Kyojuro Rengoku build. Kyojuro Rengoku is part of the nanoblock Character collection. Wondering what else is part of the Character Collection? Click Here for a list.

Number: NBCC_094

Number of Pieces: 200

Difficulty Rating: 2/5

Kyojuro Rengoku was a member of the Demon Slayer Corps in the Demon Slayer Anime. For more information about him, check out the fandom wiki page. For more information about the nanoblock builds, check out my collections page for links to other reviews.

This nanoblock build is split into 2 parts. There is the head and the body.

The head is lined up straight, so it is an easy base. Then you build the head in layers like a normal nanoblock build. As you build the head, you will add the details of the eyes. Kyojuro has long blond hair, which means that his hair is part of both the head and body build. You build the head in layers, and once it is complete, it’s time to build the body.

In creating the body, first, you build the edges of the top, which is basically a bar of each color. You build the bar up until you add the arms and the rest of the body. This is also where you build an extra level of depth to be able to add the hair to his back. Once you attach the hair in the back, you add the hips and the legs. A stack of clear brick keeps the build from tipping over.

The final steps of the build are to attach the head to the body and to build and attach the sword.

Things I liked:

how the long hair is created