Review of nanoblock Pad (NB-020) and nanoblock Pad Mini (NB-053)

This post may contain affiliate links, and I may earn a small commission at no cost to you. This commission allows me to give you more information about brick builds by enabling me to buy more sets. See my full disclosure here .
NB-020 and NB-053 both nanoblock pads with packaging

The nanoblock Pad is by far my favorite and most used accessory. This is because I find it so useful to create my builds. When I refer to my nanoblock pad or pad, I am generally talking about NB-020 or the larger pad because it is the one I’ve had longer.

What is the nanoblock Pad?

The nanoblock pad is a silicon pad that is used for the creation of nanoblock builds. There are 2 different models. The only real difference is the size of the actual pad.

NB-020
nanoblock pad with box

The NB-020 pad has 2 sections that can fold up to protect the studs. 1 section is a pad that has studs. This is the side where you can create nanoblock builds. The other section is a flat section of silicon that is nice for laying out small bricks.

NB-053
nanoblock pad mini with package

Recently a smaller version of the nanoblock pad was released. It is much smaller than the original pad. I don’t use this pad very often because the larger pad has more flexibility about where exactly it goes.

How do you use the pad?

Close up of studs on nanoblock pad

When I start a build, I always try to lay the base layer of bricks on the pad on the side with studs. Normally this works, but sometimes it doesn’t work, and you need to build off the pad.

After laying out the base layer, I add the second layer of bricks as the top layer. Because of how nanoblock designs the builds, the first and second layers are fully connected.

Normally after I build the 2 layers, I build as much as possible on the pad but sometimes, after a few layers, it makes more sense to build while holding the model in my hands.